“Finishing” Workshop
The products manufactured in our factory require various different types of corrosion protection and finishing. This workshop is equipped with both manual and automatic lines in order to provide a full range of finishes.
Fully automated Surface Treatment plant (supplied by Italian company Galvo Service) for Zinc plating (5 – 20 microns) with high volume throughput. Capable of plating small parts and fasteners as well as larger items up to 1,300 x 1,000mm.
Surface Treatment plant is capable of 2 types of Zinc plating.
Alkaline Zinc plating- for details up to 2,2m²
Acid Zinc plating - for details up to 1,5m²
Manual Surface Treatment plant (supplied by Galvo service) for plating of parts in smaller batches and where manual control is necessary to achieve highest quality results.
Drum for Silver and Nickel plating to exacting standards.
Line for Conversion Coating of Aluminium and Aluminium Alloy.
Line for Tin plating of Ferrous, Copper and Brass items.
Line for Anodic Oxidation of Aluminium parts including Black Anodizing.
Electrochemical Polishing of Stainless Steel
Phosphate of cast iron
Galvanizing
Etching of aluminum
Silver plating
"Painting" Area
Line for Electrostatic Painting using epoxy-polyester and polyester powder coatings.
Line for Wet Painting using acrylic, polyurethane, one and two pack paints etc.
A new wet dye camera was installed in the ZTA. With the purchase of the new
facility, the capacity of a Painting area is increased. The possibilities of
painting larger detailes are increased.
The camera has dimensions L / W / H - 7000mm / 4000mm / 2800mm.
Height of front door 2600mm and width 3200mm.
The camera also has a diesel stove for drying.
Powder coating
AkzoNobel is a leading global paints and coatings company and a major producer of specialty chemicals.
Calling on centuries of expertise, we supply industries and consumers worldwide with innovative products and sustainable technologies designed to meet the growing demands of our fast-changing planet.
AkzoNobel - Interzone®954
PRODUCT DESCRIPTION
A two component, low VOC, high solids, modified epoxy barrier coat designed to give long term
protection in a single coat application. Will continue to cure when immersed in water and has
excellent cathodic disbondment resistance.
INTENDED USES
Primarily designed for use in offshore splashzone maintenance, where its continued cure under
immersed conditions makes it ideal for coping with tidal movements and surges. May be applied to
reoxidised and slightly damp surfaces. Interzone 954 has also found extensive use in a number of
other corrosive environments including pulp and paper plants, chemical plants, jetties and sluice gates
AkzoNobel – Interpon BPP 330
Product Description
BPP 330 is a barrier protective powder primer that
is designed to give enhanced corrosion protection of mild steel and hot dip galvanized steel.
BPP 330 is a pure epoxy primer showing a high cross-linking degree and reinforced with barrier effect agents to provide the best barrier protection.
BPP 330 must be overcoated with a powder or a PU liquid topcoat.
BPP 330 could be used as holding primer with a maximum waiting delay of 1 week.
AkzoNobel – Interpon D1036
General
These coatings are especially designed for the architectural and construction industry, and have been proven over a 40 year lifespan. They are mainly used on aluminium and galvanised steel, but can be used anywhere that attractive, durable colors are required. They have standard exterior durability, meaning excellent color and gloss retention after 12 months Florida testing.
Trimite has manufactured premium quality liquid coatings for over 70 years and we are now one of Europe’s leading suppliers. We manufacture a comprehensive range of standard products together with bespoke coatings to meet individual customer’s special requirements.We use the latest resin and polymer technologies and work with many of the world’s leading raw material suppliers. This enables us to develop and introduce new products and coating systems to meet our customers’ exacting demands.
A high quality, general purpose stoving finish which is reliably and widely used throughout the
original equipment and sub-contracting industries.
•Tough, mar-resistant finish
•Can be applied by a wide range of spraying techniques
•Melamine reinforced for improved durability
•Energy savings achievable through lower stoving schedules
•Effective opacity normally achieved in one coat
Electropolishing is an electrochemical process similar to, but the reverse of, electroplating.
The electropolishing process smooths and streamlines the microscopic surface of a stainless steel.
As a result, the surface of the metal is microscopically featureless, with not even the smallest speck of a torn surface remaining.
In electropolishing, the metal is removed ion by ion from the surface of the metal object being polished.
Electrochemistry and the fundamental principles of electrolysis replace traditional mechanical finishing techniques, including grinding, milling, blasting and buffing as the final finish.
For details surface with 8 dm² .
ZTA provide a level of quality control, combined with high throughput and low turn-round times, that is unmatched by our competitors.
We can offer a wide range of aluminium hard anodising variations, one of which will satisfy you particular requirements for wear resistance, corrosion protection and mechanical properties. The technology applied in ZTA is equivalent to Apticoate 300N.
Specifically, the hard anodising process gives a layer of thickness up to 50μ on aluminium twice that which is normally achievable, producing excellent thermal and electrical insulation properties. For details surface with 15 dm² .